Driver: ipr
Linux Kernel Source File: drivers/scsi/ipr.c

---

printk "8155: An unknown error was received";

Probable Causes:

• "Unknown"

Actions:

• "Update device driver"

---

printk "FFFE: Soft device bus error recovered by the IOA";

Probable Causes:

• "Soft device bus error"

Actions:

• "Perform MAP 3350 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "FFF9: Device sector reassign successful";

Probable Causes:

• "Media Error"

Actions:

• "None"

---

printk "FFF7: Media error recovered by device rewrite procedures";

Probable Causes:

• "Media error"

Actions:

• "None"

---

printk "7001: IOA sector reassignment successful";

Probable Causes:

• "Media Error"

Actions:

• "Replace device"

---

printk "FFF9: Soft media error. Sector reassignment recommended";

Probable Causes:

• "Media error"

Actions:

• "None"

---

printk "FFF7: Media error recovered by IOA rewrite procedures";

Probable Causes:

• "Media error"

Actions:

• "None"

---

printk "FF3D: Soft PCI bus error recovered by the IOA";

Probable Causes:

• "Soft PCI bus error"

Actions:

• "Replace adapter"

---

printk "Unsolicited device bus message received";

Probable Causes:

• "Unsolicited device bus message"

Actions:

• "Replace device"

---

printk "FFF6: Device hardware error recovered by the IOA";

Probable Causes:

• "Device hardware error"

Actions:

• "None"

---

printk "FFF6: Device hardware error recovered by the device";

Probable Causes:

• "Device hardware error"

Actions:

• "None"

---

printk "FF3D: Soft IOA error recovered by the IOA";

Probable Causes:

• "Adapter hardware error"

Actions:

• "Replace adapter"

---

printk "FFFA: Undefined device response recovered by the IOA";

Probable Causes:

• "Device hardware error"

Actions:

• "Replace device"

---

printk "FFF6: Device bus error, message or command phase";

Probable Causes:

• "Device bus error"

Actions:

• "None"

---

printk "FFF6: Failure prediction threshold exceeded";

Probable Causes:

• "Predictive failure analysis"

Actions:

• "Replace device"

---

printk "8009: Impending cache battery pack failure";

Probable Causes:

• "Cache battery pack"

Actions:

• "Perform MAP 3300 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "3020: Storage subsystem configuration error";

Probable Causes:

• "Storage subsystem configuration error"

Actions:

• "Perform MAP 3350 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "FFF3: Disk media format bad";

Probable Causes:

• "Unknown"

Actions:

• "Perform MAP 3335 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "3002: Addressed device failed to respond to selection";

Probable Causes:

• "Device error", "May occur normally during concurrent maintenance"

Actions:

• "Replace device"

---

printk "3100: Device bus error";

Probable Causes:

• "Device bus error"

Actions:

• "Perform MAP 3350 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "3109: IOA timed out a device command";

Probable Causes:

• "Device error", "May occur normally during concurrent maintenance"

Actions:

• "Perform MAP 3350 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "9000: IOA reserved area data check";

Probable Causes:

• "Unknown"

Actions:

• "Perform MAP 3390 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "9001: IOA reserved area invalid data pattern";

Probable Causes:

• "Unknown"

Actions:

• "Perform MAP 3370 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "9002: IOA reserved area LRC error";

Probable Causes:

• "Unknown"

Actions:

• "Perform MAP 3390 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "102E: Out of alternate sectors for disk storage";

Probable Causes:

• "Out of alternate sectors for disk storage"

Actions:

• "Replace device"

---

printk "FFF4: Data transfer underlength error";

Probable Causes:

• "Device error"

Actions:

• "Replace device"

---

printk "FFF4: Data transfer overlength error";

Probable Causes:

• "Device error"

Actions:

• "Replace device"

---

printk "3400: Logical unit failure";

Probable Causes:

• "Device error"

Actions:

• "Replace device"

---

printk "FFF4: Device microcode is corrupt";

Probable Causes:

• "Device error"

Actions:

• "Replace device"

---

printk "Unsupported device bus message received";

Probable Causes:

• "Device error"

Actions:

• "Replace device"

---

printk "8150: PCI bus error";

Probable Causes:

• "PCI bus error"

Actions:

• "Replace adapter"

---

printk "FFF4: Disk device problem";

Probable Causes:

• "Device error"

Actions:

• "Replace device"

---

printk "8150: Permanent IOA failure";

Probable Causes:

• "Adapter error"

Actions:

• "Replace adapter"

---

printk "3010: Disk device returned wrong response to IOA";

Probable Causes:

• "Device error"

Actions:

• "Replace device"

---

printk "8151: IOA microcode error";

Probable Causes:

• "Microcode error"

Actions:

• "Update adapter microcode and/or device driver"

---

printk "8157: IOA error requiring IOA reset to recover";

Probable Causes:

• "Adapter error"

Actions:

• "Replace adapter"

---

printk "8008: A permanent cache battery pack failure occurred";

Probable Causes:

• "Cache battery pack failure"

Actions:

• "Perform MAP 3300 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "9090: Disk unit has been modified after the last known status";

Probable Causes:

• "Unknown"

Actions:

• "Perform MAP 3333 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "9081: IOA detected device error";

Probable Causes:

• "Unknown"

Actions:

• "Perform MAP 3390 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "9082: IOA detected device error";

Probable Causes:

• "Unknown"

Actions:

• "Perform MAP 3390 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "3110: Device bus error, message or command phase";

Probable Causes:

• "Unknown"

Actions:

• "Perform MAP 3350 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "9091: Incorrect hardware configuration change has been detected";

Probable Causes:

• "Unknown"

Actions:

• "Perform MAP 3333 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "FFF4: Command to logical unit failed";

Probable Causes:

• "Device error"

Actions:

• "Replace device"

---

printk "9031: Array protection temporarily suspended, protection resuming";

Probable Causes:

• "Unknown"

Actions:

• "Perform MAP 3310 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "9040: Array protection temporarily suspended, protection resuming";

Probable Causes:

• "Unknown"

Actions:

• "None"

---

printk "FFFB: SCSI bus was reset";

Probable Causes:

• "Unknown"

Actions:

• "None"

---

printk "FFFB: SCSI bus was reset by another initiator";

Probable Causes:

• "Unknown"

Actions:

• "None"

---

printk "3029: A device replacement has occurred";

Probable Causes:

• "Inquiry data has changed"

Actions:

• "None"

---

printk "9051: IOA cache data exists for a missing or failed device";

Probable Causes:

• "Hardware configuration error"

Actions:

• "Perform MAP 3332 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "9025: Disk unit is not supported at its physical location";

Probable Causes:

• "Hardware configuration error"

Actions:

• "Perform MAP 3310 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "3020: IOA detected a SCSI bus configuration error";

Probable Causes:

• "Hardware configuration error"

Actions:

• "Perform MAP 3350 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "3150: SCSI bus configuration error";

Probable Causes:

• "Hardware configuration error"

Actions:

• "Perform MAP 3350 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "9041: Array protection temporarily suspended";

Probable Causes:

• "Unknown"

Actions:

• "Perform MAP 3390 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "9030: Array no longer protected due to missing or failed disk unit";

Probable Causes:

• "Unknown"

Actions:

• "Perform MAP 3310 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "9008: IOA does not support functions expected by devices";

Probable Causes:

• "Hardware configuration error"

Actions:

• "Perform MAP 3330 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "9010: Cache data associated with attached devices cannot be found";

Probable Causes:

• "Unknown"

Actions:

• "Perform MAP 3320 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "9011: Cache data belongs to devices other than those attached";

Probable Causes:

• "Unknown"

Actions:

• "Perform MAP 3390 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "9020: Array missing 2 or more devices with only 1 device present";

Probable Causes:

• "Hardware configuration error"

Actions:

• "Perform MAP 3311 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "9021: Array missing 2 or more devices with 2 ormore devices present";

Probable Causes:

• "Hardware configuration error"

Actions:

• "Perform MAP 3311 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "9022: Exposed array is missing a required device";

Probable Causes:

• "Hardware configuration error"

Actions:

• "Perform MAP 3311 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "9023: Array member(s) not at required physical locations";

Probable Causes:

• "Unknown"

Actions:

• "Perform MAP 3312 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "9024: Array not functional due to present hardware configuration";

Probable Causes:

• "Hardware configuration error"

Actions:

• "Perform MAP 3390 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "9026: Array not functional due to present hardware configuration";

Probable Causes:

• "Hardware configuration error"

Actions:

• "Perform MAP 3390 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "9027: Array is missing a device and parity is out of sync";

Probable Causes:

• "Hardware configuration error"

Actions:

• "Perform MAP 3313 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "9028: Maximum number of arrays already exist";

Probable Causes:

• "Unknown"

Actions:

• "Perform MAP 3390 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "9050: Required cache data cannot be located for a disk unit";

Probable Causes:

• "Unknown"

Actions:

• "Perform MAP 3331 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "9052: Cache data exists for a device that has been modified";

Probable Causes:

• "Unknown"

Actions:

• "Perform MAP 3390 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "9054: IOA resources not available due to previous problems";

Probable Causes:

• "Unknown"

Actions:

• "Perform MAP 3321 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "9092: Disk unit requires initialization before use";

Probable Causes:

• "Unknown"

Actions:

• "Perform MAP 3334 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "9029: Incorrect hardware configuration change has been detected";

Probable Causes:

• "Unknown"

Actions:

• "Perform MAP 3390 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "9060: One or more disk pairs are missing from an array";

Probable Causes:

• "Hardware configuration error"

Actions:

• "Perform MAP 3311 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "9061: One or more disks are missing from an array";

Probable Causes:

• "Hardware configuration error"

Actions:

• "Perform MAP 3311 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "9062: One or more disks are missing from an array";

Probable Causes:

• "Hardware configuration error"

Actions:

• "Perform MAP 3311 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "9063: Maximum number of functional arrays has been exceeded";

Probable Causes:

• "Hardware configuration error"

Actions:

• "Perform MAP 3390 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "Unknown error received. Overlay ID: %d";

Probable Causes:

• "Unknown"

Actions:

• "Update device driver"

---

printk "Adapter being reset due to command timeout";

Probable Causes:

• "Command timeout"

Actions:

• "1. Update adapter microcode"
• "2. Replace adapter"

---

printk "Firmware file %s not found";

Probable Causes:

• "Unknown"

Actions:

• "Update adapter microcode"

---

printk "Invalid microcode buffer";

Probable Causes:

• "Unknown"

Actions:

• "Update adapter microcode"

---

printk "Microcode buffer allocation failed";

Probable Causes:

• "Unknown"

Actions:

• "Update adapter microcode"

---

printk "Microcode buffer copy to DMA buffer failed";

Probable Causes:

• "Unknown"

Actions:

• "Update adapter microcode"

---

printk "Permanent IOA failure. 0x%08X";

Probable Causes:

• "Unknown"

Actions:

• "Replace adapter"

---

printk "Invalid response handle from IOA";

Probable Causes:

• "Unknown"

Actions:

• "Replace adapter"

---

printk "Term power is absent on scsi bus %d";

Probable Causes:

• "Unknown"

Actions:

• "Perform MAP 3050 in the PCI-X SCSI RAID Controller Reference Guide for Linux"

---

printk "Invalid resource address reported: 0x%08X";

Probable Causes:

• "Unknown"

Actions:

• "1. Update device driver", "2. Replace adapter"

---

printk "Microcode download required";

Probable Causes:

• "Unknown"

Actions:

• "Update adapter microcode"

---

printk "Too many devices attached";

Probable Causes:

• "Unknown"

Actions:

• "Remove some attached devices"

---

printk "IOA unit check with no data";

Probable Causes:

• "Unknown"

Actions:

• "Replace adapter"

---

printk "Failed to map microcode download buffer";

Probable Causes:

• "Unknown"

Actions:

• "Update adapter microcode"

---

printk "IOA taken offline - error recovery failed.";

Probable Causes:

• "Unknown"

Actions:

• "Replace adapter"

---

printk "Adapter not supported in this hardware configuration";

Probable Causes:

• "Unknown"

Actions:

• "Remove adapter from system - it is not supported"

---

printk "Failed to set PCI DMA mask";

Probable Causes:

• "Unknown"

Actions:

• "Replace adapter"

---

printk "Write of cache line size failed";

Probable Causes:

• "Unknown"

Actions:

• "Replace adapter"

---

printk "Failed to save PCI config space";

Probable Causes:

• "Unknown"

Actions:

• "Replace adapter"